High-Performance & Thin

Thermal Insulation in UAE

NANOTECHNOLOGY Thermal Insulation

Achieving strict U-value requirements in the UAE often comes at a cost: thicker walls, lost space, higher structural loads, and construction delays.

I-GK2 is an advanced nano-technology thermal insulation coating designed to deliver exceptional thermal performance using minimal material thickness, making it ideal for projects with space, weight, or design limitations.

Especially suited for UAE buildings where floor area, façade alignment, and retrofit constraints matter.

Civil Defence A1

Two buckets labeled I-GK2.

Achieve Your Target U-Value Without Increasing Wall Thickness

Why choose I-GK2?

advanced insulation

Achieve optimal U-values with a thin layer, reducing material consumption and structural load compared to traditional insulation methods.

Cost & Time-Saving

Reduce labor, material, and installation costs while accelerating project timelines. I-GK2 eliminates complex multi-layered insulation systems.

Long-Term & Reliable

Resistant to cracking, moisture, and extreme temperatures, I-GK2 provides lasting performance without the need for frequent maintenance.

How I-GK2 Solves the Thickness Challenge

I-GK2 is a one-coat, high-performance insulating material that uses advanced nano-technology to minimize heat transfer.

Key Performance Advantage:
  • Applied as a coating. No boards, No anchors
  • Extremely low thermal conductivity (0.003 W/m·K)
  • Applied directly to internal or external surfaces

What to expect practically?

  • You achieve comparable or better thermal results with a significantly thinner layer.
Nano Thermal Insulation UAE

Technical Advantages of I-GK2

  • Ultra-low thermal conductivity
  • Minimal thickness requirement
  • One-coat thermal insulation solution
  • No thermal bridges
  • Lightweight compared to other materials

I-GK2 integrates easily into existing wall assemblies without redesigning the structure.

IGK2 Download

Where I-GK2 Is Commonly Used

I-GK2 is particularly valuable in projects where conventional insulation is difficult or impractical, including:

complex Façade architectures

projects with space limitations

Soffits and ceilings

Interior walls

curved surfaces

Buildings & villas

Thermal Performance Without Structural Compromise

Unlike multiple-layer systems, I-GK2:

  • Integrates directly with the wall build-up

  • Does not require mechanical fixings

  • Minimizes thermal bridges

  • Allows designers to maintain slimmer wall section

Result: Higher design flexibility without sacrificing compliance.

I-GK2 vs Traditional Thermal Insulation

AspectTraditional InsulationI-GK2
Required Thickness80-120 mm2-10 mm
InstallationMulti-layer systemSingle-coat
Impact on Wall SizeHighMinimal
Retrofit SuitabilityLimitedExcellent
Complex SurfacesDifficultEasy

Designed for Demanding Climates Like the UAE

High temperatures, solar gain, and energy efficiency requirements make thermal performance critical in the UAE.

I-GK2 supports:

  • Reduced heat transfer through walls

  • Lower cooling demand

  • Improved indoor comfort

  • Long-term energy efficiency strategies

Discuss Your insulation Challenge

If your project has tight wall build-ups, U-value constraints, or design limitations, a technical discussion with us may help.

IGK2

FAQs

I-GK2 uses advanced nano-ceramic microspheres that dramatically reduce heat transfer. Its thermal conductivity is 0.003 W/m·K, allowing it to achieve insulation performance previously impossible at such small thicknesses.

I-GK2 can achieve a U-value of 0.15 W/m²K with only 19 mm total system thickness. Traditional insulation materials need 80–120 mm to reach similar results.

Yes. I-GK2 is specifically recommended for high-temperature regions like the UAE, where heat gain, wall thickness limitations, and energy-efficiency targets are major challenges.

Yes, I-GK2 is suitable for internal and external applications. It performs as both a thermal insulating skim coat and a final finishing layer.

In many cases, yes. I-GK2 can achieve the required U-values without the need for bulky insulation boards, eliminating space constraints and design limitations.

I-GK2 is internationally certified and laboratory-tested. Local UAE approvals are available, with all technical data, test reports, and performance calculations available upon request.

The major benefits include: extremely low thermal conductivity (0.003 W/m·K), ultra-thin application, reduced wall thickness, improved energy efficiency, faster installation, lightweight composition, and compatibility with decorative finishes.

Yes. I-GK2 is ideal for refurbishment and retrofit work where existing wall thickness cannot be increased, yet U-value compliance is required.

Yes. I-GK2 is a non-toxic, water-based formula with low VOC emission. It also reduces overall material usage compared to thick insulation boards, supporting sustainable building practices.