Solar Street Light Supplier UAE
Best Solar Street Lights for UAE Projects
TECO is an Abu Dhabi Quality and Conformity Council approved all-in-one solar street light with the solar panel, LiFePO4 battery and LED luminaire in one fixture. Flameco Group supplies it to contractors, developers and consultants for roads, parking areas, parks and off-grid sites across the UAE.
- 30W
- 40W
- 50W
- 60W
Project enquiries welcome from Dubai, Abu Dhabi, Sharjah, Ajman and across the UAE.
IP66 · IK08 Rated
Based in Business Bay, Dubai
Abu Dhabi Quality and Conformity Council approved
Solar Street Lights UAE
30W–60W TECO Models
All-in-One Solar Lighting
LiFePO4 Battery
UAE-Wide Support
IP66 · IK08 Protection
Dubai-Based Lighting Supplier
ADQCC APPROVED Solar Street Light
All-in-One Solar Street Lighting for UAE Projects
Where grid connection is costly, slow or impractical, a self-contained solar street light can simplify lighting a road, car park or site circulation route. An all-in-one design combines the solar panel, battery and LED light in a single unit, so installation is a pole-mounted job rather than a cabling one.
Flameco Group handles solar street light enquiries for projects in Dubai, Abu Dhabi, Sharjah, Ajman and the other emirates. Send us the application, location and quantity, and we will help you identify a suitable model and prepare a quotation.
Final model selection and pole placement always depend on the lighting design, required illuminance and solar exposure of the site.
Product Features
What Defines This All-in-One Solar Street Light
Features below are taken from the manufacturer’s datasheets. Performance in the field depends on the site and the lighting design.
Integrated All-in-One Design
Solar panel, LiFePO4 battery and LED luminaire combined in a single fixture, mounted on a pole arm of 57–63 mm diameter.
Monocrystalline Solar Panel
Panel ratings of 69, 75, 100 and 125 Wp across the 30W, 40W, 50W and 60W models, per the datasheets.
LiFePO4 Battery
Lithium iron phosphate battery at 12.8V, with capacity of 30Ah, 45Ah or 60Ah depending on the model.
Die-Cast Aluminium Housing
Aluminium die-cast body with a PC lens, in grey or black.
IP66 and IK08
Rated for protection against dust and powerful water jets (IP66) and for mechanical impact resistance (IK08).
Three Colour Temperatures
3000K, 4000K or 6500K options with a colour rendering index of 80 or higher and a 105° beam angle.
Model Comparison
Compare 30W, 40W, 50W and 60W Solar Street Lights
Select a power rating to see that model only, or view all four side by side.
Showing all models
| Model No. | Power (W) | Lumens | CCT | CRI | Beam Angle | Dimensions (mm) |
|---|---|---|---|---|---|---|
| TECO-AN1-30 | 30 | 4,800 | 3000K / 4000K / 6500K | ≥80 | 105° | L 899 × W 454 × H 124Arm Ø 57–63 |
| TECO-AN1-40 | 40 | 6,400 | 3000K / 4000K / 6500K | ≥80 | 105° | L 1059 × W 454 × H 124Arm Ø 57–63 |
| TECO-AN1-50 | 50 | 8,000 | 3000K / 4000K / 6500K | ≥80 | 105° | L 1339 × W 454 × H 124Arm Ø 57–63 |
| TECO-AN1-60 | 60 | 9,600 | 3000K / 4000K / 6500K | ≥80 | 105° | L 1694 × W 454 × H 124Arm Ø 57–63 |
Lumens are the manufacturer’s published values. Dimensions are as listed on the manufacturer’s product page (L = length, W = width, H = height). Please confirm final dimensions with Flameco before specifying.
Technical Data
Solar Street Light Technical Specifications
Specifications are taken from manufacturer’s model-specific datasheets and installation manual.
Electrical & Lighting
- Light source
- SMD LED
- Colour temperature
- 3000K / 4000K / 6500K
- CRI
- ≥80
- Beam angle
- 105°
- LED lifetime
- 50,000 hours (LED source rating)
- Colour consistency
- 3-step McAdam binning
- Control option
- ON–OFF
Solar Panel & Battery
- Panel type
- Monocrystalline
- Panel rating
- 69 / 75 / 100 / 125 Wp (30 / 40 / 50 / 60W)
- Battery type
- LiFePO4, 12.8V
- Battery rating
- 30 / 45 / 60 / 60 Ah (30 / 40 / 50 / 60W)
- Charge controller
- MPPT, per installation manual
Mechanical & Protection
- Housing
- Aluminium die-cast
- Lens
- PC
- Body colour
- Grey / Black
- Ingress protection
- IP66
- Impact resistance
- IK08
Installation & Operating Environment
- Pole arm diameter
- 57–63 mm
- Recommended pole height
- 5–7 m (30W), 6–8 m (40W), 8–10 m (50W), 9–11 m (60W)
- Ambient temperature
- −20 to 50 °C
- Storage temperature
- −20 to 50 °C
- Humidity
- 10 to 90 % RH
- Installation
- By a qualified, licensed electrician, in an unshaded location
Please note: the 50,000-hour figure is the LED source rating, not a service life for the whole luminaire. Please confirm site conditions, including peak summer temperatures, with Flameco before specifying.
Applications
Where Solar Street Lights Are Used in the UAE
Suitable for outdoor locations where grid-independent lighting is appropriate.
Rural & Access Roads
Lighting where trenching and grid connection are costly or impractical.
Parking Areas
Standalone poles for open car parks, laydown areas and service yards.
Parks & Landscaped Spaces
Outdoor lighting for public and private amenity areas.
Pathways & Site Circulation
Internal roads and walkways in developments and project sites.
Off-Grid Locations
Remote sites without a convenient electrical supply.
Selected Commercial & Infrastructure Sites
Where the lighting design confirms a solar street light is appropriate.
Design note: final model selection and pole placement depend on the project layout, required illuminance, solar exposure and the lighting design. Spacing and light levels are not implied by the figures on this page.
Downloads
Solar Street Light Technical Documents
Download the datasheet for your chosen power rating, plus the installation and maintenance manual, to support your specification and approval process.
30W Solar Street Light Datasheet
40W Solar Street Light Datasheet
50W Solar Street Light Datasheet
60W Solar Street Light Datasheet
Installation & Maintenance Manual
Project Support
Need Help Choosing a Solar Street Light Model?
Share your project details with Flameco Group and we will review your enquiry and help identify a suitable product option.
- Project location in the UAE and intended application
- Required lighting coverage
- Preferred mounting height, if known
- Number of units
- Preferred model or wattage, if known
- Project drawings or specifications, if available
Frequently Asked Questions
An all-in-one solar street light combines the solar panel, battery and LED luminaire in a single fixture. Because there is no separate panel, battery box or cabling run, installation is mainly a matter of mounting the unit on a pole. It suits roads, car parks and sites where connecting to the grid is costly or impractical.
The range comes in four ratings: 30W, 40W, 50W and 60W. The published light output is 4,800 lm, 6,400 lm, 8,000 lm and 9,600 lm respectively. Each model has its own datasheet, which you can download from the Downloads section on this page.
Higher-rated models give more light output and have larger solar panels (69, 75, 100 and 125 Wp) and larger batteries. They also suit taller poles, from 5–7 m for the 30W up to 9–11 m for the 60W. The right choice depends on your site, so send us your project details and we will help you narrow it down.
Three options are listed: 3000K (warm white), 4000K (neutral white) and 6500K (cool white). All models have a colour rendering index (CRI) of 80 or higher and a 105° beam angle.
The manufacturer lists rural roads, parking areas, parks and off-grid areas among the suitable applications. Whether a particular model suits your project depends on the layout, the required lighting level and how much sun the site receives. Share your project details with Flameco and we will help you identify a suitable option.
The datasheets list an operating ambient temperature range of −20 to 50 °C. UAE summer temperatures can come close to that upper limit, so we recommend confirming suitability for your specific site with Flameco before specifying.
IP66 means the fixture is protected against dust ingress and powerful water jets. IK08 is a rating for resistance to mechanical impact. Both ratings are listed in the manufacturer’s specifications.
The datasheets give a recommended pole height for each model, from 5–7 m for the 30W to 9–11 m for the 60W. The pole arm should be 57–63 mm in diameter. Final selection also depends on the road or area width, pole spacing, the lighting level you need and the solar exposure of the site. Flameco can review your project details and help you choose.